Distal End Cutter with safety hold, ◯ Ø 0,35mm / .014”, ▢ 0.55x0.64mm / .021”x.025, 12.5cm, TC
⚠️Note: We are in the process of updating our website with new product images and information. Some images may be temporarily unavailable. Thank you for your patience!
  2. Shop
  3. Distal End Cutter with safety hold, ◯ Ø 0,35mm / .014”, ▢ 0.55x0.64mm / .021”x.025, 12.5cm, TC
HOW Ligature Pliers 45° angled
HOW Ligature Pliers 45° angled
Login to see price
Mini Distal End Cutter with safety hold, ▢ 0.41x0.56mm(.016 x .022), M .017 x.025 ,12.5cm, TC
Mini Distal End Cutter with safety hold, ▢ 0.41x0.56mm(.016 x .022), M .017 x.025 ,12.5cm, TC
Login to see price

Distal End Cutter with safety hold, ◯ Ø 0,35mm / .014”, ▢ 0.55x0.64mm / .021”x.025, 12.5cm, TC

4601
https://ergodenta.dk/web/image/product.template/22167/image_1920?unique=9a103bc

Login to see price

Not Available For Sale

This combination does not exist.

Contact Us
Website Product Category :
Wire Cutters


Reprocessing Instructions

Important: ErgoDenta instruments are supplied NON-STERILE and must be cleaned, disinfected, and sterilized before first use and after each subsequent use.
Step 1
Pre-Cleaning
Rinse under cold running water immediately after use. Remove visible debris with a soft brush. Keep instruments moist until processing.
Step 2
Automated Cleaning
Washer-disinfector: pre-rinse cold, enzymatic wash 55°C/10 min, thermal disinfect 90°C/5 min, dry.
Step 3
Inspect & Maintain
Check for residual soil, corrosion, or damage. Lubricate hinged instruments with medical-grade lubricant.
Step 4
Package
Place in ISO 11607-compliant sterilization pouches or wraps. Arrange to prevent tip contact. Seal properly.
Step 5
Sterilize
Autoclave at 134°C (273°F) for min. 18 minutes, pre-vacuum cycle. Validate with chemical and biological indicators.
Step 6
Store
Store in a clean, dry, enclosed area. Verify packaging integrity before use. Re-sterilize if compromised.
Similar Products