Pluggers & Burnishers
Pluggers and burnishers for composite condensation, marginal adaptation and final polish. Ball, acorn, football and beavertail shapes for direct restoration.
🔥 HOT
9118
ErgoLite X
Burnisher & Plugger 1.5-2.5mm | ErgoLite X
2 variants
ErgoLite
Burnisher & Plugger Ball end, 1.5-2.5mm | ErgoLite
5 variants
Burnisher & Plugger, 1.4-1.8mm | ErgoDenta
5 variants
Burnisher & Plugger, 1.9-2.3mm | ErgoDenta
5 variants
Burnisher & Plugger, Ball ended, 1.5-2.5mm | ErgoDenta
🔥 HOT
9 variants
ErgoSlip
Burnisher & Plugger, Ball ended, 1.5-2.5mm | ErgoSlip
5 variants
Burnisher & Spatel, 1.5-2mm | ErgoDenta
9127
ErgoLite X
Burnisher 1.75-2.25 mm | ErgoLite X
2 variants
ErgoLite
Burnisher 1.75-2.25mm | ErgoLite
5 variants
Burnisher, 1.5-2.0mm | ErgoDenta
9 variants
ErgoSlip
Burnisher, 1.5-2.0mm | ErgoSlip
5 variants
Burnisher, 1.75-2.25mm | ErgoDenta
5 variants
Composite Plugger, 1.3-1.6mm | ErgoDenta
5 variants
Plugger Clubbed, 1.4-1.8mm | ErgoDenta
5 variants
Plugger Flat, 1.5-2.5mm | ErgoDenta
5 variants
Plugger, 0.7-1.0mm | ErgoDenta
5 variants
Plugger, 1.0-1.2mm | ErgoDenta
9 variants
ErgoSlip
Plugger, 1.0-1.2mm | ErgoSlip
5 variants
Plugger, 1.0-2.0mm | ErgoDenta
5 variants
Plugger, 1.4-1.6mm | ErgoDenta
👀 Recently viewed Clear
About this category
Why dentists choose ErgoDenta for Pluggers & Burnishers
Pluggers and burnishers condense and adapt composite to the cavity walls and shape pre-cure anatomy. Non-stick working ends in ball, football, egg and beavertail profiles. Balanced handles keep the fine control these steps demand.
Frequently asked about Restoration
What does a typical composite cassette include?
A balanced composite kit usually has: a flat plastic, a long blade plastic, an interproximal carver, a discoid-cleoid, a ball burnisher, an acorn burnisher, and a condenser. We sell pre-built kits or single instruments.
Sectional matrix vs Tofflemire — when to use each?
Sectional matrices (with a separating ring) reproduce tight, anatomical contacts in posterior class II. Tofflemire is faster for larger restorations, build-ups, and where contour is less critical.
Do you sell rubberdam clamps in winged and wingless?
Yes — full Hu-Friedy-equivalent number range (W8A, W3, W14A, W56, W212, etc.) in both winged and wingless. Rubberdam frames, punches, and forceps available too.
How do I keep composite instruments non-stick?
Anodised titanium-nitride (gold) tips significantly reduce sticking. Wipe with alcohol between increments. Replace the working tip when the surface starts to texture.